 |
 | Mini Item#: CM1 Price:$46.95 New E-Z Fletch "Mini" lets you fletch short BLAZER style vanes up to 2 ¼” with maximum helical for more accurate arrow flight, specifically designed for shooting tighter, more consistent groups when shooting with broadheads. The Mini is perfect for carbon arrows, 5/16” (.3125) diameter or smaller. |  | Carbon Right Helical Item#: CT1 Price:$46.95 The carbon right helical will put a helical on the vane or feather. It will accommodate any arrow 5/16” (.3125) diameter or smaller and handle any right wing feather or vane up to 5” in length. This is our most popular tool and works extremely well with the new 2” vanes that are out now. |
 | Carbon Straight Item#: CS1 Price:$46.95 The carbon straight tool is perfect for arrows 5/16” (.3125) diameter or smaller with a very slight offset.The straight works well with both right wing feathers and vanes of any style up to 5” in length. It also works GREAT with the small Blazer style vanes. |  | Carbon Replacement Cap Item#: CCP Price:$3.95 This is a replacement cap for your carbon EZ Fletch tool |
 | Carbon Straight Arms Item#: CS2 Price:$16.95 This pack of arms is all you need to convert a right helical carbon tool to a straight tool. Replacing the arms involves removing the pin that connects the arms to the base, remove the arm, replace with the new arm and you’re done! |  | Carbon Helical Right Arms Item#: CA2 Price:$16.95 This pack of arms is all you need to convert a straight carbon tool to a right helical. Replacing the arms involves removing the pin that connects the arms to the base, remove the arm, replace with the new arm and you’re done! |
 | Carbon Mini Arms Item#: CM2 Price:$16.95 This pack of arms is all you need to convert a traditional blue based carbon EZ fletch with the shorter, extreme helical Mini style arms. Replacing the arms involves removing the pin that connects the arms to the base, remove the arm, replace with the new arm and you’re done! |
 | Right Helical Pro Item#: RT1 Price:$46.95 The aluminum right helical tool puts a helical twist on the fletching for maximum stability. This tool will fletch any plastic vane or right wing feather up to 5 inches in length. The aluminum tool will fletch shafts 5/16” to 26/64” diameter. |  | Left Helical Pro Item#: LT1 Price:$46.95 The left helical tool puts a helical twist on the fletching for maximum stability. This tool will do any plastic vane or left wing feather up to 5 inches in length. The aluminum tool will fletch shafts 5/16” to 26/64” diameter. |
 | Straight Pro Item#: ST1 Price:$46.95 The aluminum straight tool is designed to fletch shafts 5/16” (.3125) or larger with any vane or feather up to 5” in length. The aluminum tool will fletch shafts 5/16” to 26/64” diameter. |  | Offset Pro Item#: ST0 Price:$46.95 The offset is your best choice for crossbow bolts and a good compromise for those who want some offset, but not a full helical or need less helical for fletching clearance. The aluminum tool will fletch shafts 5/16” to 26/64” diameter. |
 | Right Helical Pro Arms Item#: RA2 Price:$16.95 This pack of arms is all you need to convert an aluminum tool to right helical. Replacing the arms involves removing the pin that connects the arms to the base, remove the arm, replace with the new arm and you’re done! |  | Left Helical Pro Arms Item#: LA2 Price:$16.95 This pack of arms is all you need to convert an aluminum tool to left helical. Replacing the arms involves removing the pin that connects the arms to the base, remove the arm, replace with the new arm and you’re done! |
 | Straight Pro Arms Item#: SA2 Price:$16.95 This pack of arms is all you need to convert an aluminum tool to a 1 degree offset. Replacing the arms involves removing the pin that connects the arms to the base, remove the arm, replace with the new arm and you’re done! |  | Offset Pro Arms Item#: SO2 Price:$16.95 This pack of arms is all you need to convert an aluminum tool to a 4 degree offset. Replacing the arms involves removing the pin that connects the arms to the base, remove the arm, replace with the new arm and you’re done! |
 | Aluminum Replacement Cap Item#: CAP Price:$3.95 This is a replacement cap for your aluminum EZ Fletch tool |
All Right Reserved © 2009 Arizona Rim Country